Delivery range of hot rolled
Grade | Thickness | Width | Length |
S235JR + AR / +N(+C) | 1,5 – 25,0 mm | 800 – 2.100 mm | max. 24.000 mm |
S235JR Tränen | 3,0 – 12,0 mm | 800 – 2.100 mm | max. 24.000 mm |
S355MC | 1,5 – 25,0 mm | 800 – 2.100 mm | max. 24.000 mm |
S420MC – S550MC | 1,5 – 20,0 mm | 800 – 2.100 mm | max. 24.000 mm |
S600MC – S700MC | 2,0 – 20,0 mm | 800 – 2.100 mm | max. 24.000 mm |
S355J2+N(+C) | 3,0 – 25,0 mm | 800 – 2.100 mm | max. 24.000 mm |
DD11 geb. gef. | 1,5 – 25,0 mm | 800 – 2.100 mm | max. 24.000 mm |
S235JR geb. gef. | 1,5 – 25,0 mm | 800 – 2.100 mm | max. 24.000 mm |
S355MC geb. gef. | 1,5 – 25,0 mm | 800 – 2.100 mm | max. 24.000 mm |
Quarto S235JR+AR / +N | 10,0 – 70,0 mm | 1.000 – 3.000 mm | 2.000 – 15.000 mm |
Quarto S355J2+N | 10,0 – 70,0 mm | 1.000 – 3.000 mm | 2.000 – 15.000 mm |
Shear cuttings, hotrolled, coldrolled or galvanized | on request | on request | on request |
Slit coils from 30 mm width in all grades | 0,5 – 15,0 mm | 30 – 1.600 mm |
- – - |
|
Chemical and mechanical properties of grades S 185 – S 355
chemical properties
Steel grade |
|
||||||
C |
Mn |
Si |
P |
S |
N |
CEV |
|
S185 |
- |
- |
- |
- |
- |
- |
- |
S235JR |
0,19 |
1,50 |
- |
0,045 |
0,045 |
0,14 |
0,35 |
S275JR |
0,24 |
1,60 |
- |
0,045 |
0,045 |
0,14 |
0,40 |
S355JR |
0,27 |
1,70 |
0,60 |
0,045 |
0,045 |
0,14 |
0,45 |
mechanical properties
Steel grade | Yield point R eh N/mm², min. | Tensile strength Rm N/mm² | elongation |
S185 | 185 | 290 bis 510 | - |
S235JR | 235 | 360 bis 510 | 26 % |
S275JR | 275 | 410 bis 560 | 23 % |
S355JR | 355 | 470 bis 630 | 22 % |
Thickness |
|
||||
---|---|---|---|---|---|
≤ 1.200 mm |
> 1.200 mm |
> 1.500 mm |
> 1.800 mm |
||
≤ 2,00 | -/+ 0,17 | -/+ 0,19 | -/+ 0,21 | - | |
>2,50 | ≤ 3,00 | -/+ 0,20 | -/+ 0,22 | -/+ 0,24 | -/+ 0,26 |
>3,00 | ≤ 4,00 | -/+ 0,20 | -/+ 0,24 | -/+ 0,26 | -/+ 0,27 |
>4,00 | ≤ 5,00 | -/+ 0,24 | -/+ 0,26 | -/+ 0,28 | -/+ 0,29 |
>5,00 | ≤ 6,00 | -/+ 0,26 | -/+ 0,28 | -/+ 0,29 | -/+ 0,31 |
>6,00 | ≤ 8,00 | -/+ 0,29 | -/+ 0,30 | -/+ 0,31 | -/+ 0,35 |
>8,00 | ≤ 10,00 | -/+ 0,32 | -/+ 0,33 | -/+ 0,34 | -/+ 0,40 |
>10,00 | ≤ 12,00 | -/+ 0,35 | -/+ 0,36 | -/+ 0,37 | -/+ 0,43 |
>12,00 | ≤ 15,00 | -/+ 0,37 | -/+ 0,38 | -/+ 0,40 | -/+ 0,46 |
>15,00 | ≤ 25,00 | -/+ 0,40 | -/+ 0,42 | -/+ 0,45 | -/+ 0,50 |
Flatness tolerance
Thickness |
|
Deviation |
|||
Standard |
Limited |
||||
≤ 2,00 |
≤ 1.200 |
18 |
9 |
||
> 1.200 |
≤ 1.500 |
20 |
10 |
||
> 1.500 |
25 |
13 |
|||
> 2,00 |
≤ 25,00 |
≤ 1.200 |
15 |
8 |
|
> 1.200 |
≤ 1.500 |
18 |
9 |
||
> 1.500 |
23 |
12 |
|||
measured between sheet and flat surface |
Inner diameter for bending of steel grades marked with “C”
Steel grade | >1 | >1,5 | >2,5 | >3 | >4 | >5 | >6 | >7 | >8 | >10 | >12 | >14 | >18 | |
≤ 1,5 | ≤ 2,5 | ≤ 3 | ≤ 4 | ≤ 5 | ≤6 | ≤ 7 | ≤ 8 | ≤ 10 | ≤ 12 | ≤ 14 | ≤ 16 | ≤ 20 | ||
S235JR |
crossway |
1,6 |
2,5 |
3 |
5 |
6 |
8 |
10 |
12 |
16 |
20 |
25 |
28 |
40 |
longway |
1,6 |
2,5 |
3 |
6 |
8 |
10 |
12 |
16 |
20 |
25 |
28 |
32 |
45 |
|
S275JR |
crossway |
2 |
3 |
4 |
5 |
8 |
10 |
12 |
16 |
20 |
25 |
28 |
32 |
45 |
longway |
2 |
3 |
4 |
6 |
10 |
12 |
16 |
20 |
25 |
32 |
36 |
40 |
50 |
|
S355JR |
crossway |
2,5 |
4 |
5 |
6 |
8 |
10 |
12 |
16 |
20 |
25 |
32 |
36 |
50 |
longway |
2,5 |
4 |
5 |
8 |
10 |
12 |
16 |
20 |
25 |
32 |
36 |
40 |
63 |
Chemical and mechanical properties of grades DD 11 – DD 14
Steel grade |
|
|||
C |
Mn |
P |
S |
|
DD 11 |
0,12 |
0,60 |
0,045 |
0,045 |
DD 12 |
0,10 |
0,45 |
0,035 |
0,035 |
DD 13 |
0,08 |
0,40 |
0,030 |
0,030 |
DD 14 |
0,08 |
0,35 |
0,025 |
0,025 |
mechanical properties
Steel grade |
|
Tensile strength Rm N/mm2 |
|
|
2 ≤ e ≤ 8 |
max. |
|
DD 11 |
170 bis 360 |
170 bis 340 |
440 |
DD 12 |
170 bis 340 |
170 bis 320 |
420 |
DD 13 |
170 bis 330 |
170 bis 310 |
400 |
DD 14 |
170 bis 310 |
170 bis 290 |
380 |
Thickness tolerances
Thickness |
|
||||
≤ 1200 |
> 1200 |
> 1500 |
> 1800 |
||
≤ 1500 |
≤ 1800 |
||||
≤ 2,00 |
+/- 0,17 |
+/- 0,19 |
+/- 0,21 |
- |
|
> 2,00 |
≤ 2,50 |
+/- 0,18 |
+/- 0,21 |
+/- 0,24 |
+/- 0,25 |
> 2,50 |
≤ 3,00 |
+/- 0,20 |
+/- 0,22 |
+/- 0,24 |
+/- 0,26 |
> 3,00 |
≤ 4,00 |
+/- 0,22 |
+/- 0,24 |
+/- 0,26 |
+/- 0,27 |
> 4,00 |
≤ 5,00 |
+/- 0,24 |
+/- 0,26 |
+/- 0,28 |
+/- 0,29 |
> 5,00 |
≤ 6,00 |
+/- 0,26 |
+/- 0,28 |
+/- 0,29 |
+/- 0,31 |
Flatness tolerance
Thickness |
Width |
Deviation |
|||
Standard |
Limited |
||||
≤ 2,00 |
≤ 1.200 |
18 |
9 |
||
> 1.200 |
≤ 1.500 |
20 |
10 |
||
> 1.500 |
25 |
13 |
|||
> 2,00 |
≤ 20 |
≤ 1.200 |
15 |
8 |
|
> 1.200 |
≤ 1.500 |
18 |
9 |
||
> 1.500 |
23 |
12 |
|||
measured between sheet and flat surface |
Chemical and mechanical properties of grade S 315 MC – S 700 MC
chemical properties
Steel grade |
C in % |
Mn in % |
Si in % |
P in % |
S in % |
Al in % |
Nb in % |
V in % |
Ti in % |
|
max. |
max. |
max. |
max. |
max. |
min. |
max. |
max. |
max. |
||
S315MC |
1.0972 |
0,12 |
1,30 |
0,50 |
0,025 |
0,020 |
0,015 |
0,09 |
0,20 |
0,15 |
S355MC |
1.0976 |
0,12 |
1,50 |
0,50 |
0,025 |
0,020 |
0,015 |
0,09 |
0,20 |
0,15 |
S420MC |
1.0980 |
0,12 |
1,60 |
0,50 |
0,025 |
0,015 |
0,015 |
0,09 |
0,20 |
0,15 |
S460MC |
1.0982 |
0,12 |
1,60 |
0,50 |
0,025 |
0,015 |
0,015 |
0,09 |
0,20 |
0,15 |
S500MC |
1.0984 |
0,12 |
1,70 |
0,50 |
0,025> |
0,015 |
0,015 |
0,09 |
0,20 |
0,15 |
S550MC |
>1.0986 |
0,12 |
1,80 |
0,50 |
0,030 |
0,015 |
0,015 |
0,09 |
0,20 |
0,15 |
S600MC |
1.8969 |
0,12 |
1,90 |
0,50 |
0,025 |
0,015 |
0,015 |
0,09 |
0,20 |
0,22 |
S650MC |
1.8976 |
0,12 |
2,00 |
0,60 |
0,025 |
0,015 |
0,015 |
0,09 |
0,20 |
0,22 |
S700MC |
1.8974 |
0,12> |
2,10 |
0,60 |
0,025 |
0,015 |
0,015 |
0,09 |
0,20 |
0,22 |
mechanical properties
Steel grade |
Yield Point ReH N/mm2, min. |
Tensile strength Rm N/mm2 |
S315MC |
315 |
390 bis 510 |
S355MC |
355 |
430 bis 550 |
S420MC |
420 |
480 bis 620 |
S460MC |
460 |
520 bis 670 |
S500MC |
500 |
550 bis 700 |
S550MC |
550 |
600 bis 760 |
S600MC |
600 |
650 bis 820 |
S650MC |
650 |
700 bis 880 |
S700MC |
700 |
750 bis 950 |
Thickness tolerances
Thickness | Lower tolerances | Upper Tolerances | |
≥ 3 |
< 5 |
-0,4 |
>+0,8 |
≥ 5 |
< 8 |
-0,4 |
+1,1 |
≥ 8 |
< 15 |
-0,5 |
+1,1 |
≥ 15 |
< 25 |
-0,6 |
+1,3 |
- All grades, sizes and surface qualities can be combined on one truck or vessel load
in cooperation with our business partner STT.
- All sheets and grades up to 2.000 mm x 8.000 mm can be pickled and / or oiled
- All sheets can be shot blasted and / or primered
- All sheets can be galvanized, please pay attention to the galvanizing classes .